水热法主要提取因素对光皮木瓜多糖结构的影响

目的 优化水热法提取光皮木瓜（Chaenomeles sinensis）多糖的提取工艺条件，对光皮木瓜不溶性多糖的组成和结构进行分析。方法 预处理后的光皮木瓜样品经水热法提取、抽滤、冲洗，浓缩等操作，分别得到不溶性多糖、醇沉多糖和醇溶多糖，通过傅里叶变换红外光谱、扫描电子显微镜及X射线衍射分析不溶性多糖的组成和结构。 结果 多糖提取的较优条件为150 ℃/45 min，料液比1∶10 (W/V)；温度对水热法提取效果影响显著，适当升高温度、延长提取时间和减少料液比有利于多糖提取；高温虽能促进半纤维素溶解，但无法使木质素和木聚糖降解；即使提取温度不同，光皮木不溶性多糖的结构差异也极小；水热法提取光皮木瓜多糖不会导致多糖的功能性基团变化，只改变多糖的化学组成。结论 该研究可为光皮木瓜多糖的结构与功能研究提供实验依据，也为陕西白河光皮木瓜资源的综合利用提供研究参考。     

Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

In this paper, a new inverse identification method of constitutive parameters is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source field from two different approaches by using the heat diffusion equation. The first one requires the temperature field measurement and the value of the thermophysical parameters. The second one is based on the kinematic field measurement and the choice of a thermo-hyperelastic model that contains the parameters to be identified. The identification is carried out at the local scale, ie, at any point of the heat source field, without using the boundary conditions. In the present work, the method is applied to the challenging case of hyperelasticity from a heterogeneous test. Due to large deformations undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and the thermal fields at the same points before reconstructing the heterogeneous heat source field. In the present case, the constitutive parameter of the Neo-Hookean model has been identified, and its distribution has been characterized with respect to the strain state at the surface of a cross-shaped specimen.     

对称消声器传递损失测量及误差修正

为了提高对称消声器传递损失的测量效率，基于声学理论分析，提出了一种单负载法传递损失计算模型。针对反射系数较大的吸声末端，导致该方法在实际测量中存在较大误差的问题，推导出了一种能够消除测试管道末端反射声波在上、下游形成多次反射的修正公式。通过自制阻抗管进行试验测试，结果表明：在末端声学负载吸声性能良好的情况下，单负载法传递损失计算模型能够精确计算出对称消声器的传递损失；修正公式能够有效地消除末端负载所引起的反射波对传递损失计算的影响，降低对末端声学负载吸声性能的要求，保证单负载传递损失计算模型的适用性。     

透明红外硫系薄膜非均匀性检测及影响因素

薄膜非均匀性的无损检测对于制备大面积高质量的红外透明薄膜尤为重要。针对红外薄膜光学均匀性难以获取的困难,提出了一种同时获得单层透明红外薄膜厚度和折射率均匀性的无损检测方法。实验上,通过磁控溅射法在二氧化硅衬底上制备了厚度约1.4μm红外透明Ge-Sb-Se硫系薄膜,然后在该薄膜上标定出36个80μm×80μm区域,利用显微傅里叶红外光谱仪测得该36个区域的透射谱,通过分段滤波的方法滤除背景噪声,运用改进的Swanepoel方法计算得到了薄膜每一个区域的厚度和折射率,进而精确获得该薄膜的厚度和折射率均匀性,结果表明精度优于0.5%。     

Airborne spread of expiratory droplet nuclei between the occupants of indoor environments: A review

This article reviews past studies of airborne transmission between occupants in indoor environments, focusing on the spread of expiratory droplet nuclei from mouth/nose to mouth/nose for non‐specific diseases. Special attention is paid to summarizing what is known about the influential factors, the inappropriate simplifications of the thermofluid boundary conditions of thermal manikins, the challenges facing the available experimental techniques, and the limitations of available evaluation methods. Secondary issues are highlighted, and some new ways to improve our understanding of airborne transmission indoors are provided. The characteristics of airborne spread of expiratory droplet nuclei between occupants, which are influenced correlatively by both environmental and personal factors, were widely revealed under steady‐state conditions. Owing to the different boundary conditions used, some inconsistent findings on specific influential factors have been published. The available instrumentation was too slow to provide accurate concentration profiles for time‐dependent evaluations of events with obvious time characteristics, while computational fluid dynamics (CFD) studies were mainly performed in the framework of inherently steady Reynolds‐averaged Navier‐Stokes modeling. Future research needs in 3 areas are identified: the importance of the direction of indoor airflow patterns, the dynamics of airborne transmission, and the application of CFD simulations.     

一种超长级联国际传输专线故障机器定位算法的研究

国际电路不同于一般网内电路，具有跨多运营商、超长距离和级联组网的特性，这些特性给该类电路的故障定位带来挑战，但同时也形成其特有的规律。本文通过总结日常运维经验和分析各厂家设备告警信号传递规律，总结出可以用于计算机实现的国际电路故障定位算法。     

红外热成像在乳腺疾病检测的应用研究

乳腺疾病已严重危害女性身心健康,其中乳腺癌更位居全球范围内女性癌症发病率和死亡率首位,因此乳腺癌的早期发现意义重大。传统结构影像学早期检测疾病具有一定局限性,而红外热成像作为功能成像技术可为乳腺癌的早期筛查提供有效线索。因此本文主要就红外热成像在乳腺疾病的早期检测及预后评估的应用价值进行综述。     

Hand hygiene and surface cleaning should be paired for prevention of fomite transmission

Touching contaminated surfaces might lead to the spread of pathogens, that is, the fomite transmission route. Although hand- and surface-hygiene practices are potentially important non-pharmaceutical interventions for the fomite route, the two interventions have been mostly studied separately in the literature. In this study, we develop a new conceptual model based on the law of mass action, analyze the temporal diffusion of contaminated surfaces and hands, and verify the model with simulations in an assumed norovirus outbreak in a buffet restaurant. A quantitative hygiene criterion is developed for the required frequency of surface disinfection and hand hygiene to control the fomite transmission in indoor environments. To eliminate surface contaminations, the product of pathogen-removal rates (including hygiene and natural death) on hands and surfaces must be no smaller than that of the human hand and surface contact frequency (ie, the net removal product must be non-negative). When the net removal product is negative, the number of contaminated surfaces and hands would show a logistic growth trend and finally approach the equilibrium. Our approach sheds light into how to optimize the combined use of hand hygiene and environmental decontamination for the best effectiveness under different settings.     

The influence of light on the chroma of aviation kerosene

Influence of light on the chroma of low pressure hydrogenation aviation kerosene was studied using different lights (ultraviolet light, infrared light, sunlight and no light) in the same environment full of oxygen. UV light with short wavelength has the largest influence. Coloring substances were isolated by adsorption on neutral alumina followed by ether extraction and identified by using infrared spectrum, elemental analysis and two-dimensional GC-MS. Oxygen-containing compounds are main coloring substances. Light can provide the required energy to convert unsaturated hydrocarbons and heteroatom compounds to phenols, quinones and ketones.